I am here to do a service to the poor people n the third world ok?
***A Solar Garden Light Colloidal Silver Maker.
***.
now to the matter at hand.
i tested the output of solar garden lights and they give out an output voltage from 7 v to 13 volts depending on model and this is usually pulsed rapidly.( i used a diode capacitor smoothing filter to measure voltage.
(optional:- you can either smooth it using a diode/capacitor or just leave it as is.)
simply remove the led and attach your 2 silver wires which should be spaced by 1 inch to 2 inches apart.
insert parallel silver wires into a glass beaker filled with boiled water.
colloidal silver will be produced very slowly and of very high quality by a solar garden light.
the whole thing can be build out of the garden solar light including attaching the silver wires to it!
only costs $2 for solar garden light plus silver rods which cost $20 i think…
it can be left next to the window…MAKE SURE WATER FILLED BEAKER IS SHIELDED FROM THE SUN to avoid degrading colloidal silver.use silver paper or cardboard,etc.
the pulsed very low current 7 to 13 voltage spikes will produce very small particles of silver.
some solar lights produce about 7 or 8 volts and some 13 volts.
but in any case this very cheap and effective way of doing it.
also instead of removing the led altogether just cut one the led’s legs and use the output from their to connect to the silver wire rods.
in effect the led will be in series with one of the rods and will give a visual indication of current flowing through the water.
velly velly cheep.
http://community.theblackvault.com/phpBB3/images/smilies/icon_lol.gif